Integrated Corrosion Solution

The Integrated Corrosion Solution (ICS) segment is involved in the provision of integrated corrosion inspection and mitigation for the oil and gas industry through Deleum Primera Sdn. Bhd (“DPSB”). The core services include but not limited to various type of surface preparation works, corrosion prevention, protection and mitigation.


The services offered by DPSB has also expanded to include Passive Fire Protection (PFP), cold and hot insulation, Thermal Spray Aluminium (TSA), pipeline integrity and riser maintenance, composite repair, fabrication and maintenance, and oil spill response services to serve the oil and gas industry as well as general industries.

 


 

SPONGE-JET is the world’s leader of clean, dry, low dust, re-useable surface preparation media and equipment.

DPSB is the sole distributor of Sponge-Jet technology for surface preparation works in Malaysia, Indonesia, Singapore, Brunei, Turkmenistan and Iraq. Sponge-Jet is an alternative green blasting technology, increasing effciency and productivity when blasting jobs are undertaken.  

spongejet 1This technology is environmental friendly, with low dust emission and most    importantly has no silica content that will affect the user or the environment.General  corrosion projects, production-oriented facilities, unique substrates or challenging safety environments can benefit from the clean, dry non-invasive capabilities of sponge blasting. 

 

The elimination of damaging ricochet in addition to achieving near perfect operator  visibility, up to 96% waste reduction and >98% hazardous dust reduction – can yield savings in  nearly every aspect of a project.

 

spongejet 2

Sponge-Jet is considered by many to be the best choice in low dust blasting or dustless blasting compared to the conventional blasting method such as grit blasting that can produce high level of noise, produces a lot of dust and may damage equipments, environment as well as health.

 

 

 


RPR Technology - The world 's fastest, safest and cleanest method for Paint Removal

 

In addition, DPSB has also ventured in coating removal by controlled induction heating - Rust Paint Removal (RPR) Technology which is ideal for removing thick paint and coatings. This technology generates heat in the steel substrate to disbond the coating without disintegration,making disposal of scheduled waste easier and cheaper. RPR technologies allows the works to be executed much faster, safer and without introducing any additional consumables, resulting direct and indirect cost savings during the execution of a project.

rpr 1RPR Technologies has developed a proven and reliable method for effective removal of coatings on steel, based on a patented induction technology. It removes most types of coatings, from thick rubber, ebonite, glass-fibre, PFP's and epoxy system to traditional paint system. It removes coatings with thickness up to 20-25 mm and the minimum metal thickness is approximately 5mm.

 

Removal rates up to 30-40 m2/hr. can be achieved, depending on the coating thickness and type. The main generator can be located up to 100 m from the workplace and the process is virtually noiseless. The work can be done simultaneously with inspection and other maintenance work taking place in the same sector. Removed paints and coatings sediments are easily collected and send for disposal as scheduled waste without any additional waste i.e. abrasive or water.

Conventional Method – Typically, coatings is removed by sand blasting or High-Pressure Water Jet (UHP) which will involve complete isolation of the sections being treated and the removal of sand, sediment and water requires a lot of time, cost and resources. These systems also require several exceptional safety measures with respect to contamination to water and protection against noise and dust in the air.

rpr 2